|Product Name:||For Spa Microdermabrasion Oil Skin Hydra Beauty Machine||Key Words:||Hydra Beauty Machine|
|Voltage:||100-240VAC, 50Hz/60Hz||Package Size:||55*52*146cm|
|Warranty:||One Year For Main Machine And 3 Months For Spare Parts||Application:||Remove Blackheads And White Heads; Improve Overall Skin Health|
spa oily skin hydrafacial microdermabrasion machine,
hydrafacial dermabrasion machine sincoheren,
sincoheren hydrafacial microdermabrasion machine
For Spa Microdermabrasion Oil Skin Hydra Beauty Machine
Mechanism of spray oxygen Operating steps
1 Clean skin deeply.
2 Click the “Spray gun ”on as Fig.5 shows.
3 Set the operation time.
4 Mix 2 ~ 3 drip SPA essential oil diluted with purified water into small cup of the o2 sprayer,water should be about 2 / 3 of the cup, and then tighten the lid tightly. Oxygen sprayer can only with liquid products, other states product will cause pinhole jam.
5 Beautician hold the spray gun, press the control button to release oxygen, And pull backwards to spray water mist.
6 Spray oxygen from top to bottom starting from the forehead to the neck, careful not to spray into the eyes or nose, in the spray oxygen process, the beautician can appease, lift up, stretch wrinkles with the other hand, more helpful for nutrition products penetrate the skin, strengthen skin elasticity, spray rate should depend on the guests' absorb state of oxygen.
1 The product should be liquid when using oxygen sprayer.
2 Avoid spraying into mouth or nose when spraying oxygen.
3 Clean the small cup and the pipe inside the sprayer every time use it, to avid jam.
Pour the purified water into the small cup, and press the control button and then pull back towards.
Supply nutrients and moisture for the skin rapidly, smooth skin, lightening stains, improve chlorosis, dull conditions, make skin rosy, white,transparent, tender, tightening indeed, with special spa oils will be better.
It consists of 4 solutions and offers you the apparative cosmetics for best treatment results.
First of all, the skin is prepared with a mild fruit acid, the hyperkeratosis is gently removed, as well as the excess sebum and dirt from the skin.
Next, the skin is treated with salicylic acid via the treatment head. The solutions are shot onto the skin at high pressure and immediately sucked out again by means of the vacuum. The skin is cleaned and optimally prepared, a clean base is important for the following treatments.
In the third step, the skin is nourished and soothed with moisturizing active ingredients such as hyaluronic acid, vitamins, minerals and urea. For treatment convenience, it is equipped with a self-cleaning function. The fourth solution is used to clean the device for the next treatment. The treatment is always painless and very pleasant for the customers.
Hydro dermabrasion Bio microcurrent Vacuum pen
Spray mist gun Photon light Ultrasonic Dermabransion High frequency Skin scrubber
|Tech||Hydro dermabrasion , photon light|
|Operate||10.4” Touch screen|
Hydro dermabrasion with 8 tips Bio microcurrent 1 piece Vacuum pen 3 different sizes Photon light with 2 handles Spray mist gun 1 piece
High frequency 1 piece Ultrasonic 2 piece
Dermabransion 1 pcs Skin scrubber 1 pcs
|Net weight||45 KG|
|Warranty||One year for main machine and 3 months for spare parts|